How to clear service 4wd light

When the Service 4WD light illuminates on your dashboard, it signals an issue needing attention in the four-wheel drive system. This light can be triggered for various reasons, from an electrical fault to an issue with the control module. In this article, we will provide a detailed guide to resolve this issue, covering everything from initial checks to more advanced steps.

Beginning: Initial Checks

Before proceeding with any repairs, it's crucial to confirm that the Service 4WD light indeed indicates a problem. Inspect your vehicle's dashboard for a light that reads "service 4WD." If the light is flashing or red in color, it definitely requires attention.

Step 1: Remove Dashboard Bezel and Knee Bolster

The first hands-on step is to remove the dashboard bezel and knee bolster. This usually involves unscrewing and taking off these parts to access internal components.

Step 2: Extract the Switch Assembly

Next, the switch assembly needs to be removed. This step is crucial for accessing the Transfer Case Control Module (TCCM).

Step 3: Unplug the Transfer Case Control Module (TCCM)

Locate and unplug the TCCM. This module controls the transfer case and is a key component in the 4WD system. Disconnecting and reconnecting it can reset the system and clear minor faults.

Step 4: Disconnect the Negative Battery Cable

If the above steps don't solve the issue, try disconnecting the negative battery cable. Leave the battery disconnected for about an hour, which can help reset the system and clear the Service 4WD light.


In many cases, following these steps will solve the Service 4WD light issue. However, if the light persists, seeking professional assistance is recommended. Issues related to 4WD can vary and sometimes require deeper diagnostics and specific repairs. Remember, addressing these issues promptly can prevent further and more costly damage to your vehicle​​​​​​​​​​.

Go up

This website uses third-party cookies