How to Clean a Vornado Fan

Cleaning your Vornado fan is essential to keep it running efficiently and maintain good air quality in your home. Over time, dust and dirt can accumulate on the blades and other parts of the fan, reducing its effectiveness and potentially spreading allergens. In this comprehensive guide, we'll walk you through the step-by-step process of cleaning your Vornado fan, ensuring it stays in top-notch condition.

Why Cleaning Your Vornado Fan Is Important

Before we dive into the cleaning process, let's understand why it's crucial to keep your Vornado fan clean. Here are some compelling reasons:

1. Improved Air Quality

A clean fan will circulate clean air, helping you breathe easier. Dusty fan blades can release particles into the air, exacerbating allergies or respiratory issues.

2. Enhanced Efficiency

Dirt and dust accumulation can make your fan work harder to move air, reducing its efficiency. Regular cleaning ensures optimal performance.

3. Prolonged Lifespan

Cleaning your fan regularly can extend its lifespan, saving you money in the long run by avoiding costly repairs or replacements.

Preparing for Cleaning

Before you begin cleaning your Vornado fan, gather the following supplies:

  • Screwdriver
  • Soft cloth or microfiber cloth
  • Mild dish soap
  • Water
  • Compressed air canister (optional)
  • Safety goggles (optional, for added protection)

Ensure you unplug the fan from the power source and let it cool down before starting the cleaning process.

Cleaning the Exterior

Start by wiping down the exterior surfaces of your Vornado fan using a soft cloth dampened with water and mild dish soap. Be gentle to avoid damaging any components.

Don't forget to clean the control panel and buttons, as they can accumulate dirt and grime over time. Use a cloth slightly dampened with soapy water, and make sure not to allow any liquid to enter the fan's interior.

Disassembling the Vornado Fan

To clean your Vornado fan thoroughly, you'll need to disassemble it. Follow these steps carefully:

  1. Use a screwdriver to remove the screws that hold the grill in place. Keep these screws in a safe place for reassembly.
  2. Carefully take off the grill and set it aside.
  3. Remove the blades by gently pulling them off the motor shaft. Be cautious not to bend or damage the blades during this process.
  4. If necessary, further disassemble the motor housing by removing any screws holding it together. Refer to your user manual for guidance on this step.

Cleaning the Blades

The fan blades are the most critical component to clean, as they are responsible for moving air. Here's how to clean them effectively:

  1. Rinse the blades under running water to remove loose dust and dirt.
  2. Fill a basin with warm, soapy water.
  3. Submerge the blades in the soapy water and use a soft brush or cloth to gently scrub away any remaining dirt or residue.
  4. Rinse the blades thoroughly with clean water and allow them to dry completely before reassembling the fan.

Cleaning the Motor Housing

While you have the fan disassembled, take the opportunity to clean the motor housing. Use a cloth or a compressed air canister to remove dust and debris from the motor and surrounding area. Be careful not to touch the motor directly to avoid any damage.

Cleaning the Grill

The grill can accumulate a significant amount of dust and dirt. Here's how to clean it thoroughly:

  1. Submerge the grill in warm, soapy water.
  2. Use a brush or cloth to scrub away dirt and grime.
  3. Rinse the grill with clean water and let it air dry completely.

Reassembling the Vornado Fan

Once all the components are clean and dry, it's time to reassemble your Vornado fan. Follow these steps in reverse order:

  1. Place the cleaned blades back onto the motor shaft, ensuring they are properly aligned.
  2. Reattach the motor housing if you had disassembled it earlier.
  3. Carefully position the grill and secure it in place with the screws you removed earlier.
  4. Double-check that all parts are securely in place before plugging the fan back in.

Additional Maintenance Tips

To keep your Vornado fan in excellent condition, here are some additional maintenance tips:

  • Regularly dust the exterior surfaces to prevent buildup.
  • Clean the blades and grill every few months, depending on usage.
  • Consider using a vacuum cleaner with a brush attachment to remove dust from hard-to-reach areas.
  • Store your fan in a clean and dust-free environment when not in use.

Troubleshooting Common Issues

If you encounter any problems with your Vornado fan, here are some common issues and solutions:

1. Fan Not Turning On

  • Check the power source and ensure the fan is properly plugged in.
  • Inspect the power cord for damage.
  • Verify that the fan is not overheated. Allow it to cool down if necessary.

2. Fan Making Unusual Noises

  • Check for loose or damaged blades. Tighten or replace them as needed.
  • Ensure the grill is securely fastened and not vibrating against other surfaces.

3. Reduced Airflow

  • Clean the blades and grill thoroughly, as described in this guide.
  • Check for obstructions in the airflow path and remove them.


Maintaining a clean Vornado fan is essential for your comfort and air quality. By following the steps outlined in this guide and performing regular maintenance, you can enjoy efficient and reliable cooling for years to come.

Frequently Asked Questions

Q1: Can I use a vacuum cleaner to clean my Vornado fan?

Yes, you can use a vacuum cleaner with a brush attachment to remove dust and debris from the exterior and hard-to-reach areas of your Vornado fan.

Q2: How often should I clean my Vornado fan?

Cleaning frequency depends on usage and the environment. It's recommended to clean the blades and grill every few months for optimal performance.

Q3: Can I use a different cleaning solution for the blades and grill?

Mild dish soap and water are generally safe for cleaning the blades and grill. Avoid using harsh chemicals or abrasive cleaners that may damage the fan's components.

Q4: What should I do if my Vornado fan is still not working after cleaning?

If your fan doesn't work after cleaning and troubleshooting, it may require professional servicing. Contact Vornado customer support or consult your user manual for further guidance.

Go up

This website uses third-party cookies